Contact us for discounts on quantities ordered over 5 units.
The Ritherdon BT terminal interface pillar is designed for housing remote monitoring equipment safely away from the signal controller.
It is an ideal solution to allow telecommunications engineers to test their equipment without entering the signal controller cabinet.
Two different heights of pillar are available.
The unit is designed and manufactured to withstand moderate forced entry, and to ensure a long service life the pillars are manufactured from 2mm thick stainless steel.
They can either be left in their natural state or polyester powder coated, with a choice of standard colours included in the price; other colours, including an anti-graffiti finish, are available on request.
Access for cable ducting is provided through the lower front section of the pillar. A length of wire provides earth bonding of the door to the body using M6 studs complete with nuts and washers.
All BT pillars are supplied with a full-width external grade plywood backboard for the fitting of BT termination equipment.
The following types of lock are available:
Tri-key screw
Tri-key camlock
Square-key camlock
|
Designation |
Overall Dimensions
(Height x Width x Depth) |
Base Plate
(Width x Depth) |
Backboard
(Width x Height) |
|
BT PILSM |
800mm x 200mm x 150mm |
280mm x 140mm |
180mm x 400mm |
|
BT PILLRG |
950mm x 200mm x 150mm |
280mm x 140mm |
180mm x 650mm |
.jpg "Click image for larger view")
