Products / Traffic Control and Monitoring /

Service Pillar

Our pillars are not limited to housing electrical feeds.  They can be found on the highways and around our towns performing a variety of functions from signal termination and CCTV to more unusual applications such as emergency help points.

The range of design features are just the same as for our feeder pillars and are summarised again here:

Fabrication

• Integral root and body and a detachable door.
• Manufactured from 2.0 mm thick stainless steel to ensure the maximum service life.
• Access for cable ducting is provided through the lower front section of the pillar.
• Earth bonding of the door to the body (two M6 studs complete with nuts and washers) as standard.

Installation

• Base plate protrudes at both the front and sides to provide stability during installation.
• Rear edge of the base plate is welded flush with the rear panel of the pillar body to permit installation close to a wall.
• Suggested ground level is marked on the rear face of the pillar.

Backboard

• Like the feeder pillars, all service pillars are supplied with a full width external grade plywood backboard for the fitting of electrical termination equipment.
• Alternative materials for the backboard can be included on request.

Security fixings

• To deter unauthorized entry and in the interest of hygiene the door is secured at the top with one stainless steel Allen screw, 25mm long.
• Standard Allen screw can be replaced by a Pin-Hex dome headed screw for extra security.
• Alternative Tri-Key cam-lock can be specified at no extra cost.

Electrical supply and fitting service

• Ritherdon and Company is able to provide a supply and fitting service for the electrical termination equipment. This service can include pre-wiring ( wiring team).

Colours available as standard 

• Natural, stainless steel finish.
• Dark Grey.
• Light Grey.
• Dark Green.
• Black.

Prices for other colours are available on request.

Service Pillar £83.21 Service or Feeder Pillar The Ritherdon service pillars (often called feeder pillars) are designed with integral roots and bodies and detachable doors....		R200 mini £75.64 R200 Stainless Steel Mini Pillar A smaller feeder pillar to hold isolators and cut-outs for street lighting and traffic applications.		RH Hinged Pillar £135.43 RH Hinged Pillar The door on this service or feeder pillar is flush with the body and attached with a full-length stainless steel piano hinge and has a watertight neoprene gasket....
Utility pillar £60.82 Utility Pillar Economic utility service/feeder pillar in a natural or a durable, powder-coated finish.		£75.64 BT Terminal Interface Pillar The Ritherdon BT terminal interface pillar is designed for housing remote monitoring equipment safely away from the signal controller....		£43.95 BT Termination Peg The Ritherdon BT Termination Peg is a replacement for existing corroded “Pegs” which are usually located next to the signal controller cabinets.