Ritherdon & Company Limited

Feeder Pillars

Feeder Pillars

Feeder pillar group

Feeder pillar groupFeeder pillars - ER150Feeder pillars - R150Feeder pillars - R200 miniFeeder pillars - R200Feeder pillars - R300Feeder pillars - R460

Part number: Feeder Pillars
£81.25
£97.50 inc. VAT
The stainless steel feeder pillar range from 150 to 460 mm wide, with integral roots and lift-off doors and with either a high quality powder coated or natural finish as standard...
Contact us for discounts on quantities ordered over 2 units.

The Ritherdon service/feeder pillar is designed with an integral root and body and a detachable door.  To ensure a long service life the complete unit is manufactured from 2.0 mm thick stainless steel and is available either in the natural stainless steel finish or with a powder coated finish.

Access for cable ducting is provided through the lower front section of the pillar and duct apertures in the sides and back of the root. An earth cable is provided for bonding the door to the body, with two M6 studs complete with nuts and washers.

The base plate is designed to provide stability during installation and protrudes at both the front and sides. To permit installation close to a wall the rear edge of the base plate is welded flush with the rear panel of the pillar body. To ensure installation at the optimum depth a suggested ground level is marked on the outer faces of the pillar.

Size Overall Dimensions
(Height x Width x Depth)
Base Plate
(Width x Depth)
Backboard
(Width x Height)
*ER150 Feeder Pillar 900mm x 150mm x 150mm 175mm x 1300mm 130mm x 600mm
R150 Feeder Pillar 1060mm x 150mm x 150mm 230mm x 190mm 130mm x 600mm
R200 Mini Feeder Pillar 750mm x 200mm x 100 mm 280mm x 140mm 180mm x 330mm
R200 Feeder Pillar 1060mm x 200mm x 200mm 280mm x 240mm 180mm x 600mm
R300 Feeder Pillar 1060mm x 300mm x 150mm 380mm x 190mm 280mm x 600mm
R460 Feeder Pillar 1060mm x 460mm x 230mm 540mm x 270mm 440mm x 600mm

 *The ER150 Utility Pillar

The Utility Pillar is simpler and lighter than our standard range and is available only in the 150x150 mm size.

It offers a highly cost-effective feeder pillar for situations where the enhanced appearance of the R150 is not required, while still retaining the superior appearance and corrosion resistance of stainless steel.

 

Fixings available

  • Tri-key cam-lock (standard)
  • Stainless steel Allen screw 25mm long
  • Stainless steel “Pin-hex” dome headed screw 25mm long
  • Pin-hex camlock (10mm A/F, 4mm pin)

Backboard

All pillars are supplied with a full width external grade plywood backboard for the fitting of electrical termination equipment.

Alternative materials for the backboard can be included on request.

Colours available as standard

  • Natural (check price above)
  • Dark Grey
  • Light Grey
  • Dark Green
  • Black

Please contact us to discuss prices for alternative colours (inc. graffiti resistant finish) and other options.

Add review

Name:
Email:
Comment:
Spam protection:
 
  • Case studies
  • Testimonials
  • Technical information

© 2011 – 2014 Ritherdon & Company Limited. All rights reserved.
http://www.ritherdon.co.uk/products/enclosures/feeder-pillars-product.html
Page updated 10th Jan 2014, 16:42

Web Design Lancashire by Brickweb